Track accessories
TRAMWAY INLAYS -009
Tramway inlays for Peco 009 'Mainline' track in 106mm lengths. Available with 'Setts'-cobbles or plain surface as shown. Price £4 each section or 3 for £10 + P&P.
Each piece is designed for fitting next to each other with minimum gap.
|
Peco 009 mainline
|
Tramway inlays for 009 Peco set track centre section £2.95 each.
Larger quantities may attract a discount - please request a quote.
|
009 tramway centre inlay sections
PAVED or PLAIN 87.5mm STRAIGHT to fit Peco ST-401 (or ST-411) x1 @ £2.95 x3 @ £7.90 or CURVED to fit Peco ST-403 (or ST-412) x1 @ £2.95 x1 @ £8.90 |
Plain & 'Cobbled' Tram way Inlays for Peco 009 Set Track courtesy of Jim Owers for the diorama
Tramway inlays for Peco 009 Set Track. Centre inlay, plus 2 outer areas, giving approx. 30mm wide roadway. Note other widths are available, and designs for specific areas can be accommodated. Prices typically 3 pieces for one straight length 87.5mm long £7.90
3 pieces for a set track single curve price £8.90 plus p&p
Discounts may be applied for larger quantities.
Price for the central (between track) inlay is £2.95 each.
|
Straight 009 tramway inlay 87.5mm
PAVED or PLAIN to fit Peco ST-401 (or ST-411) 3 parts - centre plus two outers @ £7.90 |
Curved 009 tramway inlay
PAVED or PLAIN to fit Peco ST-403 (or ST-412) 3 parts - centre plus two outers @ £8.90 |
Colin Withey used our Tram Inlays for the Engine Shed inspection pit on his 009 Layout.
tram inlay for peco 009 turnouts
009 Tram Inlays for Peco 009 Points, £7.50 for the 4 Inner (between tracks) parts. Or £16.50 for the whole set, 6 Parts
12mm peco track inlays
Inlays for PECO 12mm Flexi track, straights £5 each or curves depending on Radius required. Also available with Plain concrete finish or 'Setts' or Cobbles
Please contact me for more information
Hugh Norwood has used one of our sets of Turnout Inlays inserts to Help fill the gap on his famous Angst Lesspork 009 layout.
gauge 0 Platform Edging strips 7mm scale 150mm long can be cut to suit your platform £4.17 + Vat =£5 per strip. more than 25 lengths £2.50 + vat £3 each. + p&p note! bespoke curves can be provided quoted for you.
7mm gauge 0 point rodding anti friction brackets
3D Printed parts easily assembly onto 0.5mm brass rod, accepts 1mm or Less brass or steel rod for operating points. Purchase price 60p each or 20 for £10 + P&P £2.65
